Commercial Rolling Service Doors
1140 Montague Ave. - San Leandro - CA - 94577 - 510.483.9700
Alameda, Castro Valley, Oakland, Piedmont, San Leandro, San Lorenzo
SERVING:
R

&

S

R&S was founded in 1963 as a repair and installation business; quick growth and increasing demand resulted in the start of limited production of a basic service door. Since then, regional manufacturing/distribution operations have been established to provide a full line of quality rolling door products to an expanding dealer network. R&S is dedicated to being "the manufacturers with the personal touch".
Standard & Optional Features For Service Doors
Type 18 Slat
Type 25 Slat
Optional flat slat for use on service doors to 16"W
Standard flat slat for use on service doors where environmental conditions are a consideration
Type 30 Slat
Type 20 Slat
Curved slat for use on service doors where strength and durability are a consideration
Optional curved slat for use on service doors to 16"W
"Climate-Guard"

Climate control is provided by the combination of a flat slat curtain, hood baffle, guide weatherstripping and astragal.

Additional Models
"Thermal-Guard"

An effective thermal barrier is created by the combination of 22 ga steel flat faced slats, 3/4" polyurethane foam, and 24 ga steel back slats


"Fire Doors"

3-Hour/Class 'A' Label or Oversized Certificate of Compliance. Designed to close automatically from a fully open position.

FIRE DOORS MANUFACTURED BY R & S
R & S Fire Doors combine the durability, security, efficiency and space saving advantages of a rolling door with the added life and property saving benefits of automatic fire protection.
Options

Smoke Detectors: Photoelectric (detects smoke and heat) or ionization (detects combustion); requires connection to a release device with compatible voltage.

Release Devices: Electro-thermal and McCabe links (normally open circuits); electro-magnetic and time delay failsafe releases (normally closed circuits).

Perimeter Gasketing: Brush seals factory applied to guides and foot piece, field installed on header, to aid insmoke and draft control.

Vision Lites: SIngle or multiple 4" wide cut-outs, glazed with clear wire glass (1 1/2 hour rating.

Slopped Footpieces: For special sill conditions.

Cylinder Locks: On footpiece.

Home Page
ADDITIONAL INFORMATION OR REQUEST FOR QUOTE

R & S Motor Operators <