Dock Door Equipment
1140 Montague Ave. - San Leandro - CA - 94577 - 510.483.9700
Alameda, Castro Valley, Oakland, Piedmont, San Leandro, San Lorenzo
SERVING:
R & S offers a wide range of loading dock equipment to meet your particular requirements.
The Mini-Dok is the newest addition to broad range of loading dock equipment form BLUE GIANT - a company that has been innovating loading dock solutions since 1963. With its versatility, flexibility and user-friendliness, the Mini-Dock can make light work out of most loading operations.
R

&

S
  • Balanced spring-assisted deck lifting system
  • When operator pushes on the integral control handle the lip automatically lays out
  • One piece, continuous front and rear hinge pins
  • Hole in lip allows for quick and easy handling by installers
  • The Mini-Dok has the heaviest standard back frame in its class - 3/8" thick x 6" high
  • Rear hinge is supported in 8 places - 6 double hinge lugs plus 2 corner tilt pockets
  • Only premium quality MIG welding is used in the manufacturing process
MODEL
DECK SIZE
CAPACITY
#
ins
lb.
MD6620
66 X 28
9,000
MD7220
72 X 28
9,000
MD7820
72 X 28
9,000
MD6625
66 X 28
11,250
MD7225
72 X 28
11,250
MD7825
78 X 28
11,250
MD6630
66 X 28
13,500
MD7230
72 X 28
13,500
MD7830
78 X 28
13,500
  • Blue Giants exclusive side-to-side tilt provides 3" of tilt to compensate for canted trucks
  • Tilt assures a smooth transition surface into and out of trucks
  • Reduces structural fatigue to the leveler
  • Reduces wear to lift truck tires
  • Each unit is supplied with two rugged bumper blocks
  • 10"w x 13"h x 4" thick fabric reinforced molded rubber bumpers are standard
  • Blocks can be lagged or welded to the dock face
PENTALIFT EQUIPMENT CORP.

MODEL EDM

20,000 lb. capacity - install external to dock face - dual extension spring design - maintenance free operation

ALSO AVAILABLE IN HYDRAULIC OPERATION
PIONEER MFG.

"Bar Lift" Series Edge-of-Dock Leveler

Model BL66 or BL72

Handcrafted Quality a Pioneer Tradition
HOME PAGE
 ADDITIONAL INFORMATION OR REQUEST FOR QUOTE
R & S offers a wide variety of loading dock equipment to meet your particular requirements.
R & S
R & S
weather-shield Insect Control Automatic Roll-up Barrier uses an economical, motorized system to raise and lower the curtain panel for ease of operation. Opening and closing speed is approximately 12" per second.

weather-shield Insect Control Manual Roll-on Barrier features a spring-loaded galvanized steelroller tube and is designed for door sizes up to 10'w x 10'h. Install can be: under lintel; face-mount; or inside of overhead door standoff.

 weather-shield Insect Control Sliding Barrier Curtain is well suited for providing air ventilation at an affordable price. Designed to slide to one side (STD) or bi-part if required, the sliding barrier is built with ease of operation in mind.

flex-master Windbreaker Roll-up Barrier is designed for retail store front applications; dumpster doors; ground level doors; maintenance shops; or wherever environmental control is desired. Available for door sizes up to 26' w.
weather-shield Windbreaker Sliding Barrier Curtain is designed for both interior and exterior applications, these curtains are custom made to your specifications. Ideally suited for extended platform loading docks with overhead canopies or as in-plant room dividers and partitions.
HOME PAGE
ADDITIONAL INFORMATION OR REQUEST FOR QUOTE
R & S offers a wide variety of loading dock equipment to meet your particular requirements.
ECONO MAX

DOCK SEALS AND DOCK SHELTER
Dock Seals provide an effective seal between the truck trailer and building wall and are the best choice when a tight seal is needed.
Dock Shelters are used on large door openings serving a variety of trailer sizes. They allow full access to trailer openings and may out-last Seals.
OVER 35 YEARS OF SERVICE

IN CALIFORNIA
When you want the best …

Call R & S

A Service Company
24-HOUR EMERGENCY SERVICE

7 DAYS A WEEK
HOME PAGE
ADDITIONAL INFORMATION OR REQUEST FOR QUOTE